Glossary


Sort by: Most Relevant  |  Most Recent  |  Name

1 - 7 of 7 results

1) Angular creep

Extremely slow speed movement of a tilter that is the result of normal, internal leakage of fluid control valves.

2) Angular travel

The angular difference between the two tilting travel limits of the platform deck or forks, expressed in degrees.

3) Lift

The maximum vertical distance through which the load hook can travel.  The total allowable hook movement between its upper limit of travel and its lower limit of travel. The term "Lift" or "Lifts" may also refer to lift tables, scissor lifts and personnel lifts. Lift tables are ergonomic devices utilized to raise, lower or tilt work loads such as pallets and containers. Lift tables are a scissors lift device used to raise, lower, stack, convey and/or transfer material between two or more elevations and not limited to landings. Such movement enables the worker to access the load at an acceptable level so as to not exert undue physical strain while working with the item(s). A scissors lift is a raising/lowering device that is supported or stabilized by one or more pantograph leg sections. Likewise, personnel lifts are used to raise and lower humans to appropriate working heights so that they may work at a safe reaching level and will have benefit of increased movement not afforded by a conventional ladder.

4) Lift Manufacturers (LMPS) Industry Group

The Lift Manufacturers Product Section (LMPS) members are the resource for industry best practices, standards, information, and equipment that lifts, rotates, tilts, and otherwise positions materials. Industry scissors lifts and tilters can also improve the working interface between people and the materials they must move to reduce injury, increase productivity, and eliminate wasted motion, while providing a significant return on investment.

5) Platform/Fork length

The platform or fork dimension of a tilter as measured perpendicular to the hinged edge (tilt axis).  This is considered the side of the platform or fork.

6) Tilter

A device which mechanically angles a container towards the worker for easier loading and unloading of parts.

7) Tray sorter

A high speed type of sorting conveyor with sorts in the 250 cases per minute range, this type consists of a continuously moving train of independent trays that move in a straight line and recirculate in either a horizontal or vertical (over and under) closed loop. At the proper moment, controls cause the tray to tilt to either side, thereby discharging the load to the desired take away lane.