1) Pallet flow rack
May be considered back-to-back selective rack. Inclined conveyor wheel sections are installed in the rack enabling back-loaded pallets are allowed to flow by gravity to the front or pick face. Pallet flow rack is useful for the movement of fast-moving items and serves to increase density of storage and throughput.
2) Pallet racks
A single or multi-level structural storage system that is utilized to support high stacking of single items or palletized loads.
3) Portable rack
Self contained steel rack units made up of bases and/or decks and posts. Portable rack may be welded or collapsible units either having a knockdown feature which can be a space saver when units are not in use.
4) Push back rack
Utilizing wheels in the rack structure, this rack system allows palletized goods and materials to be stored by being pushed up a gently graded ramp. Stored materials are allowed to flow down the ramp to the aisle. This rack configuration allows for deep storage a each rack level.
A single or multi-level structural storage system that is utilized to support high stacking of single items or palletized loads
6) Rack Association
The Rack Manufacturers Institute, Inc. is an independent incorporated trade association affiliated with the Material Handling Industry. The membership of RMI is made up of companies which produce the preponderance of industrial storage racks.
7) Rack Manufacturers Institute, Inc. (RMI) Industry Group
The Storage Manufacturers Association (SMA) members are the Industry’s leading suppliers of industrial storage equipment. They supply storage solutions worldwide and in virtually every major manufacturing and distribution sector. Industrial storage equipment includes steel shelving, industrial work platforms (mezzanines), work and assembly stations, modular drawer equipment, clothing storage lockers, movable base storage equipment, storage containers and directly related equipment.
8) Rack standards
Authoritative guides, or directives, used in the manufacture, sales and use of storage rack systems and components.
9) Rack supported building
A complete independent storage rack system which is the basic structural system of a building. A storage or warehouse facility in which storage rack functions as the structural support for the roof.
10) Reach truck
Industrial trucks equipped with a telescoping fork arrangement that permits the stacking of loads double deep. For storage depths greater than two, there is at least one example in Europe where the fork unit mechanically disengages from the mast allowing it to run into the rack on narrow rails under its own power which is derived from the truck via an umbilical cord. Applications like this can be considered a very special case of a drive-in type storage rack.
11) Read/Write Tag
Technology that allows for a identification tag to be programmed and revised while the tag is still on the container, rack or pallet.
12) Reel racks
A storage rack configuration (one or more levels high) that is designed specifically to store reels of materials such as cable and cord. The reels are "cradled" in the rack.
13) Reinforcing member
The component of rack decking which increases the capacity rating and rigidity of the assembly. Examples are: channels, tubes, rods, etc.
Rack Manufacturers Institute, Inc. The Rack Manufacturers Institute, Inc. is an independent incorporated trade association affiliated with the Material Handling Industry. The membership of RMI is made up of companies which produce the preponderance of industrial storage racks. Rack Manufacturers Institute 8720 Red Oak Blvd., Suite 201 Charlotte, NC 28217 Phone: (704) 676-1190 Fax: (704) 676-1199 Jeff Woroniecki, Managing Director
15) R- Mark
In 1998, the members of the Rack Manufacturers Institute (RMI) voluntarily chose to cause conformance to RMI 97 and any successor documents(s) to be a condition of membership in the Association.
In 1999, the members of RMI agreed to a certification process administered through a panel of independent Registered Professional Engineers. Certification requires the submitter to demonstrate a working knowledge of RMI 97 including delivering evidence of various physical tests needed to compute frame and beam load tables.
Upon satisfactory completion of the Certification Process, the submitter is awarded a license to apply a unique registered R-Mark to designs. The R-Mark is only applied by a Licensed Professional Engineer along side of his/her PE seal.
The process is open to all rack manufacturers. RMI encourages specifiers and users of Industrial Steel Storage Rack to consider the value of R-Mark certification when applying racking solutions.