Direct drive solutions offer an innovative alternative to traditional belt drives that deliver greater performance, reliability, and lower Total Cost of Ownership (TCO).Two common types of drive solutions available on the market are direct drive solutions and belt drive solutions. With direct drives, the gear motor is directly connected to the load being driven and does notrequire additional connection components. Belt drives, in comparison, are offset from the driven load and require belts and pulleys to connect the two. They also often include a motor mount, sheaves, machineguard, and a torque arm, making them a more complicated set up than the gearbox, NEMA adapter, and motor combination of direct drives. The compact direct drives also provide higher efficiency, reliability, and safety features compared to traditional drive packages.Gear motors from NORD DRIVESYSTEMS are offered as parallel shaft and right-angle mounted direct drives for versatile installation according to application and space constraints. The gear units are manufactured with robust, one-piece UNICASE™ housings with all bearings and seal seats contained within the housing for additional protection and reliability. Bearing life is extended in this design thanks to the lack of radial loads on the motor shaft and the gearbox input shaft. NORD electric motors combine easily with their modular gear units and provide high-efficiency, high output torques, and an ample output speed range across multiple frame sizes. Variable frequency drives extend these capabilities, providing precise speed control of the drive, reducing the number of system variants, and decreasing the quantities of spare parts backstock.Direct drive systems offer improved safety over belt drives as interaction with equipment is minimized and the enclosed solution reduces the chance of injury. Belt drive systems require additional protection measures and resources for safeguarding users from their moving parts. Belts also require adjusting or replacing multiple times per year which can be dangerous if not handled properly by skilled personnel. Maintenance for NORD direct drives systems is significantly quicker, easier, and more cost effective than belt drives due to fewer wear parts and modularity. If the motor needs replacing, the old motor can simply be uninstalled, and the new one attached and connected to power. Motor replacement on belt drives, however, requires the whole system be unassembled before the new motor can be attached and the belt adjusted.Direct drive systems prove themselves to be more efficient than belt drives due to reduced mechanical friction and no belt tension reduction. Since they do not have belts, they also do not require downtime to retension the belt, achieving greater system availability. In intralogistics systems that consume a lot of energy such as conveyor operations, energy efficient direct drives with premium efficient IE5+ synchronous motors significantly reduce energy costs and system variants thanks to their constant torque even at partial load and low speed ranges.About NORD DRIVESYSTEMS®Group With more than 4,900 employees, NORD DRIVESYSTEMS has been developing, producing, and selling drive technology for over 50 years, and it is a global leader among full-service providers in the industry. In addition to standard drives, NORD delivers application-specific designs and solutions for special requirements, such as energy-saving drives or explosion-protected systems. NORD has subsidiaries and sales partners in 80 countries worldwide. The dense sales and service network guarantees optimal availability, enabling short delivery times, and customer-oriented service. NORD produces a very diverse range of drives for torques from 88 lb-in to more than 2.5 million lb-in, provides motors in the power range of 0.16 – 1,341 hp, and manufactures frequency inverters with the required power electronics of up to 200 hp. Inverter solutions are available for conventional control cabinet installations as well as for decentralized, fully integrated drive units. Visit nord.com.ContactArielle Spotts608-850-1444Arielle.Spotts@nord.com

NORD offers a wide range of after-sales service options to ensure products maintain peak performance.NORD DRIVESYSTEMS offers a full, comprehensive range of after-sales services and support to ensure efficient performance and longevity of their products. Services include commissioning, maintenance, spare parts management, digital solutions, and more. They also provide self-service options, with FAQs addressing common inquiries via easy, 24/7 online access.The NORD Service Department provides installation and commissioning assistance via phone, email, remote support, or on-site support. This support is tailored to individual system requirements and includes optimization and adjustment of NORD products, laser alignment, vibration measurement, thermography, endoscopy, and commissioning reports. For electronic drive components, the basic commissioning package consists of verifying electrical installation and parameters on variable frequency drives, performing test runs for drives, and backing up electronic data via NORDCON software. An advanced commissioning package is also available which includes all basic services, plus network analysis of the voltage supply for components. NORD works closely with their customers to find the commissioning package best suited to their project and budget needs.Regular maintenance of drive systems ensures long service life, high system availability, plannable downtimes, and calculable costs. NORD Smart Check is a modular service package that allows customers to choose the service level that works best for their needs with basic, advanced, and premium tiers available. When a NORD technician performs maintenance on a drive, all recommended wearing parts are replaced, any damage found is noted, and on-site analysis is performed. The preventative replacement of wearing parts not only reduces the risk of unscheduled downtimes, but also reduces unnecessary wear on other parts for longer product life. After the inspection is completed, a collection of drive data and status information is provided with recommendations for action if irregularities are found.If repair is necessary, NORD has in-house repair shops at their facilities in Waunakee, Wisconsin and McKinney, Texas. They also have a network of authorized service centers throughout the world for convenient local access when and where customers need it. Once a unit is received, service technicians will diagnose the cause for faults, clean and check all components, and replace damaged wearing parts, seals, bearings, and oil. After reassembly, a final assessment is performed to ensure the drive is working properly before it ships back to the customer. Warranties for the performed work and replaced parts are also provided. If a repair is determined to be too costly, NORD will assist in ordering an exact replacement or selecting a new unit.NORD also offers spare parts for motors, gear motors, and variable frequency drive components. These parts are stored at a central warehouse in Wisconsin as well as three other facilities across the U.S. for increased availability and fast delivery. Stocked parts can often be shipped same day to minimize system downtime, and courier service is available for expedited delivery. Replacement parts can also be ordered online via the Spare Parts Shop which offers comprehensive, unit-specific part diagrams for easy identification and ordering. NORD’s Spare Parts Shop can reduce customer warehousing costs and provided round-the-clock access to the latest spare parts information.Mechanical failures and technical problems can occur at any time or place. To ensure breakdowns are resolved quickly with minimal loss, NORD has an emergency hotline in place for spare parts, replacement drives, and technical support for their products, even without a service contract. Known as “NORD 9-1-1”, this service provides 24/7/365 emergency breakdown assistance to get operations up and running quickly. This service can be easily accessed by calling NORD’s main phone line at +1 888-314-6673.As a global manufacturer, NORD plays a large part in the transmission of energy and motion. Their system modernization support is used to update drive systems to newer technology to increase efficiency and reduce carbon footprint. As part of their NORD ECO service, NORD conducts an energy and performance analysis of the drive technology to identify ways to reduce energy requirements and Total Cost of Ownership (TCO). System modernization could include switching to asynchronous or synchronous motors with higher efficiency classes (IE3/IE5+), installing sensor technology for drive monitoring, retrofitting a variable frequency drive, or replacing an existing VFD with a newer drive that has improved functionality and additional features.NORD can be contacted by phone at +1 888-314-6673 for all service and support needs. Those who prefer digital communication can visit their digital services webpage to submit a service request or contact the NORD Sales Team or Service Department.About NORD DRIVESYSTEMS®With more than 4,000 employees, NORD DRIVESYSTEMS has been developing, producing and selling drive technology for more than 50 years, and is one of the global leaders of full-service providers in the industry. In addition to standard drives, NORD delivers application-specific concepts and solutions for special requirements such as energy-saving drives or explosion-protected systems. In financial year 2017, annual sales amounted to $781 million. NORD now has subsidiaries and sales partners in 98 countries worldwide. The dense sales and service network guarantees optimal availability, enabling short delivery times and customer-oriented service. NORD produces a very diverse range of drives for torques from 88 to more than 2.2 million lb-in, provides electric motors in the power range of 0.16 to 1,341 HP, and manufactures frequency inverters with the required power electronics of up to 215 HP. Inverter solutions are available for conventional control cabinet installations as well as for decentralized, fully-integrated drive units.ContactArielle Spotts608-850-1444Arielle.Spotts@nord.com

MAXXDRIVE industrial gear units offer versatility, reliability, and long service life for high-torque applications.MAXXDRIVE industrial gear units from NORD DRIVESYSTEMS are built to handle a wide range of heavyduty industrial applications in sectors such as agribusiness, wastewater, bulk material handling, and steel production. There are four different models in the product family including parallel and right-angle shaft designs that reliably drive bucket elevators, agitators, mixers, drums, mills, cranes, and more. These industrial drives are characterized by high output torques up to 2,495,900 lb-in, extensive input options and mounting designs, and robust UNICASE™ housings that ensure excellent load capacity, long service life, longer bearing life, and quiet operation. MAXXDRIVE units additionally offer many add-on modules for high versatility, as well as added safety measures to protect operators and equipment.Standard, compact MAXXDRIVE industrial gear units include MAXXDRIVE parallel industrial gear units and MAXXDRIVE right-angle industrial gear units. Parallel units have 11 case sizes to choose from and offer a torque range up to 2,495,900 lb-in, performance up to 8,075 hp, and 2- or 3-stage gearing options. Rightangle units also have 11 case sizes available but in 3- and 4-stage gear reductions with output torque up to 2,301,200 lb-in and performance up to 2,850 hp. Both housing designs feature large roller bearings and center distances that increase load capacity and service life of components, enabling systems to operate effectively. For applications such as agitators or mixers that require increased bearing load capacities and additional oil leak protective measures, a dry cavity and spread bearing design with reinforced output bearings is available. Various sealing options as well as cooling and heating options allow for flexible temperature management and implementation in environments with fluctuating ambient conditions.For crane and hoist applications, NORD developed specialized MAXXDRIVE XD parallel industrial gear units. These drives deliver torque up to 2,495,900 lb-in, performance up to 8,075 hp, and are available in 3- and 4-stage reductions that have identical housings for standardization and variant reduction. Compared to the compact MAXXDRIVE series, these units feature a center distance increased by 35%, allowing maximum space for the motor and rope drum to be on the same side of the gearbox in a unique U-shaped arrangement ideal for lifting. The housings are built according to the UNICASE design principle and are FEAoptimized for overhung load, especially downwards forces, and include an inspection cover on top of the unit for easy maintenance and service access.MAXXDRIVE XT industrial gear units are ideal for high-speed applications requiring significant thermal ratings. These 2-stage, right-angle gear units feature a finned housing design that helps dissipate heat faster while an axial fan and air guide covers enhance airflow to prevent the unit from overheating, even at maximum power. These effective cooling abilities make them a reliable, robust solution in environments with demanding ambient conditions and large temperature fluctuations. MAXXDRIVE XT gear units offer 7 case sizes available to choose from with torque output up to 663,800 lb-in and performance up to 2,825 hp. The right-angle design additionally enables a symmetrical configuration for mirror image installations with space constraints and can also be mounted with a motor on a swing base for certain applications.In addition to standard configuration options, NORD also offers add-ons such as their Endurance Package that consists of a comprehensive set of protective measures that optimize performance, maintain reliability, and extend longevity of drive components in harsh environments, such as the Grain Industry. The five main features of the package include a drying agent filter, oil sampling point, quick fit filter trolley connection, oil inspection glass, and an additional quick fit filter trolley connection with an oil drain cock. Configured specifically to meet the demands of the grain sector, this package combines multiple options into one convenient solution.For more information on MAXXDRIVE gear units, visit www.nord.com.About NORD DRIVESYSTEMS®With more than 4,000 employees, NORD DRIVESYSTEMS has been developing, producing and selling drive technology for more than 50 years, and is one of the global leaders of full-service providers in the industry. In addition to standard drives, NORD delivers application-specific concepts and solutions for special requirements such as energy-saving drives or explosion-protected systems. In financial year 2017, annual sales amounted to $781 million. NORD now has subsidiaries and sales partners in 98 countries worldwide. The dense sales and service network guarantees optimal availability, enabling short delivery times and customer-oriented service. NORD produces a very diverse range of drives for torques from 88 to more than 2.2 million lb-in, provides electric motors in the power range of 0.16 to 1,341 HP, and manufactures frequency inverters with the required power electronics of up to 215 HP. Inverter solutions are available for conventional control cabinet installations as well as for decentralized, fully-integrated drive units.ContactJames ChandlerKey Markets Managerinfo.us@nord.com

NORD provides their Authorized Distributors, sales partners, and internal team members with valuable, comprehensive training to ensure they can better serve customers using NORD’s innovative drive solutions.NORD DRIVESYSTEMS is a manufacturing company with a clear focus on customer needs. Their global network stretches across more than 80 countries to provide short delivery times, local customer support, and rapid service. They consistently seek new opportunities for growth and ways to better support their customers. One of these ways is continuous training for their internal teams as well as their network of Authorized Distributors and sales partners.As part of the internal sales team, NORD District Sales Managers (DSMs) receive an all-inclusive training when they join the company to enable them to have high degree of knowledge when visiting and assisting customers. Due to the continued growth of industries and NORD, they must remain current on product and industry knowledge by attending sales meetings, internal and external trainings, as well as reading sales manuals, books, or trade journals. NORD recently hosted a two-day training for their entire sales team that discussed variable frequency drives, MAXXDRIVE industrial gear units, and interchanges.NORD works with a network of approximately 500 experienced and highly knowledgeable distributors across North America to provide customers with prompt service. To help distributors deepen their knowledge and understanding of NORD products and services, NORD offers in person individualized trainings as well as hosts Open Trainings four times a year across the four assembly plants in the United States. The three-day sessions are led by NORD industry experts and cover NORD gear units, MAXXDRIVE industrial gear units, electric motors, electronic control products, and an overview of the myNORD online customer portal. The trainings also feature hands on activities such as gear unit selections and building UNIVERSAL worm drives. Private trainings can be held where requested by the distributor such as their facility, an on-site location, at one of NORD’s facilities, or via online. NORD will match the training curriculum to the distributor’s needs to ensure they are able to offer quality support to customers. In 2025, NORD will begin offering online seminars that cover gearboxes, motors, specific applications, and more.NORD’s trainings on the myNORD online customer portal are presented by the eBusiness team and showcase a comprehensive overview of their online tools. Attendees can expect to complete the training knowing how to size a unit for a new application, configure products, generate quotes with account specific pricing, track existing orders, as well as navigate the Spare Parts Shop. Also covered is how to access previous order history, serial number documentation, and operation and maintenance manuals. These trainings are available to customers and distributors in person at a designated facility, during Open Distributor trainings at NORD facilities, or via an interactive online course.The internal Customer Experience (CX) team at NORD is responsible for processing purchase orders, supporting customers with related sales activity, quoting requested products, and answering incoming phone calls. NORD heavily invests in the department’s training and development with a dedicated training team overseeing an 11-week program dedicated to teaching new employees what NORD does as a company, their innovative product line, and all the tools needed to excel in their roles. During the program, trainees are exposed to the full scope of order types and possible scenarios, so they are prepared when it comes to real customer interactions. Employees also receive additional training as processes are improved and new products are developed to ensure they always provide the best customer service possible.For the production team at NORD, proper training is imperative for high quality output. The production training team implements job instructions for each department to ensure correct processes are being followed. Employees begin onboarding at a mock work bench covering general product overview, gearbox basics, gearbox parts, and quality training, enabling comfortability before setting foot on the production floor. They then move on to hands on training on the floor, on the job with a certified trainer overseeing their progress. Each team member also receives safety, equipment operation, and forklift training to prevent injuries and limit lost time instances. Employees only operate equipment they are certified to use and are recertified every 3 years to remain up to date on current best practices.NORD DRIVESYSTEMS continuously strives to offer the best partnership to their customers with efficient drive systems, industry-specific solutions, competent advice, and worldwide service. Their frequent training opportunities for their team members helps achieve this goal by staying up to date on industry and product knowledge. To learn more about NORD’s innovative drive solutions, visit www.nord.com.About NORD DRIVESYSTEMS®With more than 4,000 employees, NORD DRIVESYSTEMS has been developing, producing and selling drive technology for more than 50 years, and is one of the global leaders of full-service providers in the industry. In addition to standard drives, NORD delivers application-specific concepts and solutions for special requirements such as energy-saving drives or explosion-protected systems. In financial year 2017, annual sales amounted to $781 million. NORD now has subsidiaries and sales partners in 98 countries worldwide. The dense sales and service network guarantees optimal availability, enabling short delivery times and customer-oriented service. NORD produces a very diverse range of drives for torques from 88 to more than 2.2 million lb-in, provides electric motors in the power range of 0.16 to 1,341 HP, and manufactures frequency inverters with the required power electronics of up to 215 HP. Inverter solutions are available for conventional control cabinet installations as well as for decentralized, fully-integrated drive units.ContactNORD Gear Corp – United StatesMember of the NORD DRIVESYSTEMS GroupArielle SPOTTS608-850-1444Arielle.Spotts@nord.com

MAXXDRIVE industrial gear units from NORD DRIVESYSTEMS are designed to handle heavy-duty applications such as bucket elevators, agitators, conveyor belt drives, mixers, mills, drums, crushers, and more. The product family is available in a parallel shaft design as well as a right-angle design. Constructed according to the UNICASE™ housing principle in which all bearings and seals are contained within a single casting, the robust gear units are optimized to ensure excellent load capacity, long service life, long bearing life, quiet operation, and are lower in weight than jointed housing gear units. The industrial gear units additionally offer many modules, input options, and output options for high versatility and adaptability to a wide range of applications.   MAXXDRIVE industrial gear units offer a unique combination of flexibility and durability. They feature mounting surfaces on six sides of the drive for versatile mounting configurations and flexible integration into installation spaces. As a standard, the gear units are equipped with an efficient NBR or FKM sealing system that is suitable for many environments. For specific ambient conditions, optimized sealing systems incorporating gamma-ring, labyrinth, and Taconite seals are also available.   Standard compact MAXXDRIVE industrial gear units include MAXXDRIVE parallel industrial gear units and MAXXDRIVE right-angle industrial gear units. MAXXDRIVE parallel industrial gear units have 11 case sizes to choose from and offer a torque range up to 2,495,900 lb-in, performance up to 8,075 hp, and 2-stage or 3-stage gearing options. MAXXDRIVE right-angle industrial gear units also have 11 case sizes available but in 3-stage and 4-stage gear reductions with output torque up to 2,301,200 lb-in and performance up to 2,850 hp. Both designs are extremely durable thanks to UNICASE housings and high precision bevel gearing. High quality, low friction bearings and large center distances ensure significant load capacity and reliable automation. Reinforced output bearings with a spread bearing design and dry cavity are also available for applications requiring increased bearing load capacities and additional oil leak protective measures such as agitators or mixers.   MAXXDRIVE XD parallel gear units have 10 case sizes available in 3-stage or 4-stage reductions and like the MAXXDRIVE parallel gear units, deliver output torque up to 2,495,900 lb-in and performance up to 8,075 hp. These industrial gear units are engineered to meet the special requirements of crane and hoist applications, featuring a center distance increased by 35% compared to the compact MAXXDRIVE series. This extended distance enables maximum space for the motor and rope drum to be on the same side of the gearbox in a unique U-shaped arrangement ideal for lifting gear drives. The housings are FEA-optimized for overhung load, especially downwards forces, and include an inspection cover on top of the unit for easy maintenance and service access. Both 3-stage and 4-stage versions feature the same overall unit dimensions and center distances for a standardized design that reduces system variants and lowers the Total Cost of Ownership (TCO).   MAXXDRIVE XT industrial gear units have been designed especially for applications requiring high speed ratios in combination with high powers. They offer a 2-stage, right-angle gear unit with a unique housing geometry optimized to achieve maximum thermal capacity. An efficient cooling fin design helps dissipate heat faster while an axial fan and air guide covers enhance airflow to prevent the unit from overheating at maximum power. Thanks to their effective cooling abilities, these drives provide a robust solution in environments with demanding ambient conditions and large temperature fluctuations. The right-angle design additionally enables a symmetrical configuration for mirror image installations where space is limited and can also be mounted on a swing base depending on the application.   In addition to standard MAXXDRIVE options, NORD also offers an Endurance Package combining several protective measures that ensure drives will withstand challenging environments, such as those within the Grain industry. The five main components of the package include a drying agent filter, oil sampling point, quick fit filter trolley connection, oil inspection glass, and an additional quick fit filter trolley connection with an oil drain cock.   Learn more about the power of MAXXDRIVE industrial gear units at www.nord.com.   About NORD DRIVESYSTEMS® With more than 4,000 employees, NORD DRIVESYSTEMS has been developing, producing and selling drive technology for more than 50 years, and is one of the global leaders of full-service providers in the industry. In addition to standard drives, NORD delivers application-specific concepts and solutions for special requirements such as energy-saving drives or explosion-protected systems. In financial year 2017, annual sales amounted to $781 million. NORD now has subsidiaries and sales partners in 98 countries worldwide. The dense sales and service network guarantees optimal availability, enabling short delivery times and customer-oriented service. NORD produces a very diverse range of drives for torques from 88 to more than 2.2 million lb-in, provides electric motors in the power range of 0.16 to 1,341 HP, and manufactures frequency inverters with the required power electronics of up to 215 HP. Inverter solutions are available for conventional control cabinet installations as well as for decentralized, fully-integrated drive units.   Contact Arielle SPOTTS 608-850-1444 Arielle.Spotts@nord.com

IDS Imaging Development Systems introduces a new 3D camera in the Ensenso product line. With its compact, industrial-grade design and the combination of a very short working distance and a large field of view, the Ensenso B is particularly suitable for bin picking applications. Thanks to its high depth of field, it is able to capture objects over a large area and to localize all parts in a container at once, for example. This optimizes the pick-and-place process and facilitates emptying of containers. The stereo vision camera is now available in series production.   The great strength of Ensenso B lies in the very precise detection of objects at close range. It provides a wide field of view and an impressively high depth of field. More specifically, this means that the area in which an object is sharply imaged is unusually large. At a distance of 30 centimeters between the camera and the object, the Z-accuracy is approx. 0.1 millimeters. The maximum working distance is 2 meters.   The housing, which accommodates two 5 MP color cameras from IDS, a pattern projector and all the electronics, is completely enclosed. This simplifies the cabling. Ensenso B complies with protection class IP65/67, which is an advantage in demanding operating conditions. With dimensions of just 120 x 56 x 104 millimeters,, the new 3D camera's design is also very space-saving. This makes it ideal for use on a robot arm, for example.   Interested parties will be able to experience the capabilities of the new 3D camera at the VISION trade fair in Stuttgart, Germany, in October. IDS exhibits at booth 8C60 and presents the camera in a practice-oriented demo system.   The Ensenso B will also play an important role in the next video session on the company's own Vision Channel, which addresses the topic of "Full-featured 360° 3D point clouds using a multi-camera setup" on 24 September. Registration for the free online event is now open at en.ids-imaging.com/visionchannel-media-details/items/3d-point-clouds-using-a-multi-camera-set-up.html.   For more information, please visit www.ids-imaging.us/ensenso-3d-camera-b-series.html.   About IDS Imaging Development Systems GmbH IDS Imaging Development Systems GmbH is a leading manufacturer of industrial cameras and pioneer in industrial image processing. The owner-managed company develops modular concepts of powerful and versatile USB, GigE and 3D camera as well as models with Artificial Intelligence (AI). The almost unlimited range of applications covers multiple non-industrial and industrial sectors of equipment, plant and mechanical engineering. The AI image processing platform IDS NXT is extremely versatile and opens up new areas of application where classic rule-based image processing reaches its limits. With visionpier, IDS operates an online marketplace that brings together suppliers of ready-made image processing solutions and interested end customers in a targeted manner.   Since its foundation in 1997 as a two-man company, IDS has developed into an independent, ISO and environmentally certified family business with around 350 employees. The headquarters in Obersulm, Germany, is both a development and production site. With branches and representative offices in the USA, Japan, South Korea, the UK, France and the Netherlands, the technology company is also globally represented.   IDS Imaging Development Systems Inc. +1 (781) 787-0048 usasales@ids-imaging.us www.ids-imaging.us   IDS Imaging Development Systems GmbH Claudia KIRSCH +49 7134 96196 0 c.kirsch@ids-imaging.de   Jacqueline Krauß +49 7134 96196 0 j.krauss@ids-imaging.de www.ids-imaging.com

Together with high-efficiency gear motors, NORD variable frequency drives intelligently control conveyor systems with high precision regulation, motor brake management, and POSICON integrated positioning mode for synchronous operation.   Electronic drive technology such as variable frequency drives and motor starters optimize automation with dynamic control of speed, precision regulation, and scalable functionality. Electronic control products from NORD DRIVESYSTEMS are designed with flexible adaptation to any application and are quick to install, easy to operate, and compatible with all common bus systems and controllers. NORD offers AC vector drives for centralized operation in a control cabinet as well as for decentralized, fully integrated use directly on the motor. Both design options offer an Industry 4.0 solution that can be networked and with the internal PLC, enable pre-processing of internal status data or data from externally connected sensors for remote status monitoring.   In the Food & Beverage Industry, canning and bottling plants require strict quality standards and must maintain full availability while avoiding failures and unplanned downtimes. Using reliable technology with simple maintenance is key to operational efficiency. NORDAC PRO SK 500P variable frequency drives from NORD offer a control cabinet solution with scalable functionality, easy installation, and high precision regulation. An integrated multi-protocol Ethernet interface enables efficient connection to Ethernet-based control systems as well as remote control of the drives. Via online maintenance, users can inspect the entire system, check for faults, and evaluate data from all NORD variable frequency drives in specific plant sections to plan for service. These VFDs also feature POSICON integrated positioning mode and precise speed control to ensure containers are not falling over during conveyance, stop at the correct positions when being filled, and run at high conveyor speeds during sealing.   Airport baggage handling systems are intricate arrangements of complex conveyor lines that must operate with precision and reliability. Many of these conveyors utilize helical bevel gear units from NORD DRIVESYSTEMS paired with decentralized, motor mounted NORDAC FLEX variable frequency drives and either IE3 synchronous motors or IE5+ permanent magnet synchronous motors. Together, this modular solution is cost-effective, supports easy maintenance, and is easy to install via quick connectors that allow for preassembly. Variable frequency drives in these solutions often have the brake rectifier integrated directly into the VFD for dynamic control, enabling rapid starting and stopping of the conveyors as baggage travels through the system. Additional options such as Safe Torque Off (STO) safety circuit, Ethernet/PROFINET network control, and a local/remote selector switch can also be configured with the drives to increase safety measures as well as reduce the hardware and cabling required to wire the baggage system.   Distribution centers utilize a variety of applications such as curved conveyors, conveyor belts, mergers/pushers, vertical conveyors, lifters, and more to efficiently move parcels from one end of the facility to the other. NORD’s LogiDrive complete drive solution is ideal for these applications thanks to it’s focus on energy efficiency, variant reduction, low maintenance, and long service life. In advanced LogiDrive solutions, a NORDAC LINK variable frequency drive is combined with either a DuoDrive integrated gear unit and motor or a NORDBLOC.1® helical bevel gear unit with an IE5+ synchronous motor. NORDAC LINK VFDs feature full Plug & Play capabilities for quick commissioning and easy maintenance, various functional safety options, and motor brake management to prevent parcel disruptions. Smooth operation and transfer between conveyors is achieved thanks to high precision regulation and synchronization. The integrated Ethernet interface can additionally be extended though optional modules to meet precise application requirements.   NORD developed NORDAC ON/ON+ variable frequency drives to meet the special needs of horizontal conveyor technology. Many intralogistics applications utilize these VFDs in combination with IE3 asynchronous motors (NORDAC ON) or IE5+ synchronous motors (NORD ON+) due to their high precision control and high overload characteristics for both synchronous and asynchronous motors. These VFDs also include integrated functions to optimize operational performance of conveyors, an integrated multi-protocol Ethernet interface for easy integration into automation systems, and full Plug & Play functionality for quick installation and maintenance.   Automation in theaters is used to move spotlights, curtains, and stage elements quickly and efficiently while prioritizing the safety of actors and stage workers. For these environments, NORD utilizes versatile NORDAC PRO SK 500P control cabinet variable frequency drives paired with reliable gear motors. These centralized VFDs feature integrated brake management, a brake chopper and line filter, sensor-less current vector control, and enable the programming of complete performances via touchscreen operating consoles. Integrated functional safety options also ensure drives can operate seamlessly in the vicinity of artists, technical staff, and even the audience while avoiding serious accidents.   From bottling plants to theater hoists, NORD’s innovative drive technology can be configured to match a wide range of applications. Learn more by visiting www.nord.com.   About NORD DRIVESYSTEMS® With more than 4,000 employees, NORD DRIVESYSTEMS has been developing, producing and selling drive technology for more than 50 years, and is one of the global leaders of full-service providers in the industry. In addition to standard drives, NORD delivers application-specific concepts and solutions for special requirements such as energy-saving drives or explosion-protected systems. In financial year 2017, annual sales amounted to $781 million. NORD now has subsidiaries and sales partners in 98 countries worldwide. The dense sales and service network guarantees optimal availability, enabling short delivery times and customer-oriented service. NORD produces a very diverse range of drives for torques from 88 to more than 2.2 million lb-in, provides electric motors in the power range of 0.16 to 1,341 HP, and manufactures frequency inverters with the required power electronics of up to 215 HP. Inverter solutions are available for conventional control cabinet installations as well as for decentralized, fully-integrated drive units.   Contact Arielle Spotts 608-850-1444 Arielle.Spotts@nord.com  

LogiDrive® complete drive solutions from NORD DRIVESYSTEMS reduce planning and commissioning efforts through cost-effective, standardized designs engineered to industry standards and application requirements. These solutions are especially well suited for Post & Parcel, Airport, and warehouse logistics as they are specifically aligned with the intralogistics and material handling requirements of these industries. For each intralogistics area, there are advanced versions utilizing IE5+ synchronous motor technology and basic versions with IE3 asynchronous motors. While LogiDrive advanced drive systems address issues such as energy efficiency, variant reduction, and Total Cost of Ownership (TCO), the basic versions primarily focus on cost efficiency.   Post & Parcel and Airport industry applications such as baggage handling systems, parcel distribution systems, and parcel sorting systems require reliable drive solutions that keep up with their high material flow and minimize downtimes. Advanced LogiDrive systems with IE5+ permanent magnet synchronous motors deliver high overload capacity and consistent high efficiency over a wide speed range, even at partial load and low speeds. By using IE5+ motors, systems can achieve significant cost reductions, increase operational efficiency, and provide a fast Return on Investment (ROI).   Both advanced and basic LogiDrive systems feature a compact, modular design with Plug & Play capabilities for simple installation, commissioning, and maintenance. In combination with IE5+ motors, advanced versions for the Post & Parcel and Airport industries also include a NORDAC LINK variable frequency drive and either a NORDBLOC.1® helical bevel gear unit or a DuoDrive integrated gear unit. NORDAC LINK decentralized variable frequency drives are wall mounted and feature an Ethernet interface, PROFIsafe options for functional safety, and PLC functionality for drive-related functions.   Basic LogiDrive versions offer a flexible gear unit selection with an IE3 asynchronous motor and motormounted NORDAC FLEX variable frequency drive. The NORDAC FLEX is NORD’s most versatile VFD with fully scalable functions configurable to specific requirements, an optional Ethernet interface extendable for each option module, and various functional safety options. These VFDs also deliver high precision regulation with POSICON integrated positioning mode to ensure accurate movement in intralogistics systems.   Like the Post & Parcel and Airport industries, warehouse technology such as chain and roller conveyors, belt and pallet conveyor technology, container conveyor technology, and overhead conveyors also require reliable drives with high system operation. Advanced LogiDrive solutions for these specific applications include NORDBLOC.1® helical bevel gear units paired with IE5+ permanent magnet synchronous motors, and either a NORDAC ON+ variable frequency drive or a NORDAC FLEX variable frequency drive. This complete solution has a high system efficiency with high overload capacity, a long service life, and low maintenance to effectively power conveyors transporting heavy loads and industrial containers.   NORDAC ON/ON+ variable frequency drives were designed by NORD for the special requirements of horizontal conveyor technology and feature a version for IE3 motors (ON) as well as a version optimized for use with IE5+ synchronous motors (ON+). The series is characterized by an integrated multi-protocol Ethernet interface for easy integration into automation systems with required protocols easily set via drive parameters. They also offer Plug & Play capability for quick installation and maintenance, integrated functions to improve conveyor efficiency, and full PLC functionality for drive-related functions.   Basic LogiDrive versions for warehousing also utilize NORDAC ON variable frequency drives for their scalable functionality and dynamic control. In addition to the VFD, the solution includes a UNIVERSAL SI worm gear unit and an IE3 asynchronous motor. UNIVERSAL SI worm gear units provide considerable installation space advantages due to their compact design, flexible input and output options, and universal mounting capabilities. Together, these products deliver a cost-optimized, standardized solution capable of reducing system variants.   Whether your focus is on efficiency, a small number of system variants, or cost effectiveness, NORD has LogiDrive solution that will meet precise application needs. Learn more by visiting www.nord.com.   About NORD DRIVESYSTEMS® With more than 4,000 employees, NORD DRIVESYSTEMS has been developing, producing and selling drive technology for more than 50 years, and is one of the global leaders of full-service providers in the industry. In addition to standard drives, NORD delivers application-specific concepts and solutions for special requirements such as energy-saving drives or explosion-protected systems. In financial year 2017, annual sales amounted to $781 million. NORD now has subsidiaries and sales partners in 98 countries worldwide. The dense sales and service network guarantees optimal availability, enabling short delivery times and customer-oriented service. NORD produces a very diverse range of drives for torques from 88 to more than 2.2 million lb-in, provides electric motors in the power range of 0.16 to 1,341 HP, and manufactures frequency inverters with the required power electronics of up to 215 HP. Inverter solutions are available for conventional control cabinet installations as well as for decentralized, fully-integrated drive units.   Contact Arielle Spotts 608-850-1444 Arielle.Spotts@nord.com    

If you’ve recently purchased a NORD DRIVESYSTEMS gear motor, you may have noticed a new sticker with a QR code located on the unit. Quick Response (QR) codes can store a wide range of data and enable the user to access information almost instantly. These stickers are a new development in NORD’s expansive digital services and provide users quick access to product specifications, documentation, and service requests on-the-spot via their mobile device. The codes can be scanned using a photo app or QR code app and will bring the user to NORD’s digital service webpage with their respective country’s language and contacts.   NORD’s existing digital services include the Documentation Center, a resource for product-specific manuals and literature, the Spare Parts Shop for fast online ordering of stock components and replacement parts, and the myNORD Customer Portal, a comprehensive tool that allows users to select and configure their NORD drive systems online. The QR codes extend these services with a defined service request contact form, as well as the ability to easily contact local sales and service departments. When a unit’s code is scanned, the form will automatically populate with the specified unit’s equipment/serial number and the proper documentation including spare parts list, manuals, Declaration of Conformity (DoC), 2D/3D drawings. Order details can also be accessed, saving time and ensuring the correct unit information is being referenced.   QR code stickers are now in use at NORD USA’s four facilities in Waunakee, Wisconsin, Corona, California, Charlotte, North Carolina, and McKinney, Texas. On all gear motors and solo motors, the sticker is located on the motor cooling fin near the nameplate or on the terminal box if the motor is smaller than case Size 80. For gear units only, the sticker is located under the nameplate and for units with variable frequency drives, the sticker is located underneath the nameplate.   Additional updates are planned to expand the functionality of these QR codes to make them even more resourceful, including notifications to inform customers of digital updates for variable frequency drives via the digital services page.   About NORD DRIVESYSTEMS® With more than 4,000 employees, NORD DRIVESYSTEMS has been developing, producing and selling drive technology for more than 50 years, and is one of the global leaders of full-service providers in the industry. In addition to standard drives, NORD delivers application-specific concepts and solutions for special requirements such as energy-saving drives or explosion-protected systems. In financial year 2017, annual sales amounted to $781 million. NORD now has subsidiaries and sales partners in 98 countries worldwide. The dense sales and service network guarantees optimal availability, enabling short delivery times and customer-oriented service. NORD produces a very diverse range of drives for torques from 88 to more than 2.2 million lb-in, provides electric motors in the power range of 0.16 to 1,341 HP, and manufactures frequency inverters with the required power electronics of up to 215 HP. Inverter solutions are available for conventional control cabinet installations as well as for decentralized, fully-integrated drive units.   Contact NORD Gear Corp – United States Member of the NORD DRIVESYSTEMS Group Arielle SPOTTS 608-850-1444 Arielle.Spotts@nord.com

NORDAC ON/ON+ variable frequency drives deliver intelligent control of conveyor systems with an integrated multi-protocol Ethernet interface to improve efficiency, reduce system variants, and optimize performance.   NORDAC ON/ON+ decentralized variable frequency drives are the latest electronic control innovations to be produced by global manufacturer, NORD DRIVESYSTEMS. These VFDs have been engineered for the specific requirements of horizontal conveyor technology and feature integrated functions to optimize operation performance, an integrated Ethernet interface, full Plug-and-Play capability, and a compact design.   NORDAC ON/ON+ variable frequency drives feature three frame sizes and two base versions: a version designed for combination with IE3 asynchronous motors (NORDAC ON) and a version optimized for use with IE5+ synchronous motors (NORDAC ON+). Both versions offer compact frame sizes that can be motor- or wall-mounted based on the application and space requirements. The drives can be used over a wide speed range, enabling variant reduction for large intralogistics systems and streamlining operation. NORDAC ON supports a power range of 0.50 – 3.00 hp while NORDAC ON+ supports 0.50 – 4.00 hp.   As with all NORD variable frequency drives, the NORDAC ON/ON+ is equipped with a dynamic internal PLC for drive related functions. It can process data from connected sensors and actuators, initiate control sequences, and communicate drive and application data to the control center, networked components, or to cloud storage. For this purpose, the VFDs have an integrated multi-protocol Ethernet interface for easy integration into automation systems. Whether for ProfiNet, EtherCAT, or EtherNet/IP, the required protocol can be easily set via drive parameters. Firmware updates can also be implemented via Ethernet.   In addition to simple configuration, NORDAC ON/ON+ VFDs offer quick installation and maintenance with full Plug-and-Play functionality. The 24 V DC supply for control and communication is integrated into the 3-phase 400 V supply connected to the drive via a 6-pole connector. A daisy chain connector can also be used to supply power to multiple drives, optimizing cable lengths and significantly reduce wiring efforts.   NORDAC ON/ON+ VFDs include a variety of integrated functions to improve conveyor efficiency and integrate seamlessly with Industrial Internet of Things (IIoT) environments. These functions include integrated sensors via digital inputs, LED indicators for quick and simple diagnostics, an energy-saving function for optimized efficiency in partial load operation, and brake management for precise control of an electromagnetic holding brake for wear-free brake actuation. Optional functions such as Safe Torque Off (STO), Safe Stop (SS1-t), and internal braking resistors are also available for configuration.   With their scalable functionality and dynamic control, NORDAC ON/ON+ variable frequency drives are suitable for a wide range of environments, particularly those in warehousing, post and parcel, airport technology, and other large-scale intralogistics applications. Learn more about these high efficiency, decentralized VFDs at www.nord.com.   About NORD DRIVESYSTEMS® With more than 4,000 employees, NORD DRIVESYSTEMS has been developing, producing and selling drive technology for more than 50 years, and is one of the global leaders of full-service providers in the industry. In addition to standard drives, NORD delivers application-specific concepts and solutions for special requirements such as energy-saving drives or explosion-protected systems. In financial year 2017, annual sales amounted to $781 million. NORD now has subsidiaries and sales partners in 98 countries worldwide. The dense sales and service network guarantees optimal availability, enabling short delivery times and customer-oriented service. NORD produces a very diverse range of drives for torques from 88 to more than 2.2 million lb-in, provides electric motors in the power range of 0.16 to 1,341 HP, and manufactures frequency inverters with the required power electronics of up to 215 HP. Inverter solutions are available for conventional control cabinet installations as well as for decentralized, fully-integrated drive units.   Contact NORD Gear Corp – Member of the NORD DRIVESYSTEMS Group Arielle SPOTTS 608-850-1444 Arielle.Spotts@nord.com

NORD’s drive solutions provide intralogistics systems with reliable operation, dynamic control, and long service life to effectively operate with greater system availability.   NORD’s versatile modular product system offers highly configurable, energy efficient, and reliable solutions to meet specific supply chain application requirements.   The MODEX 2024 exhibition will be open March 11th – 14th at the Georgia World Congress Center in Atlanta, GA. Global drive solutions manufacturer, NORD DRIVESYSTEMS, will be in attendance to showcase their latest innovations for intralogistics applications. NORD has thousands of drives installed across the world and offers complete drive solutions specialized for intralogistics handling such as simple commissioning, Plug-and-Play capabilities, standardization, energy savings, and more.   NORD DRIVESYSTEMS will be exhibiting at Booth C8066 with these industry-focused products:   NORDAC ON/ON+ Variable Frequency Drives NORDAC ON/ON+ variable frequency drives were designed with the special requirements of horizontal conveyor technology in mind and have been optimized for use with IE3 motors (NORDAC ON) as well as IE5+ synchronous motors (NORDAC ON+). The electronic drives deliver a compact, dynamic solution for IIoT environments with their full Plug-and-Play capabilities, integrated multi-protocol Ethernet interface, and when operated with the NORDCON software tool, the drive can be controlled and programed via PC. The drives offer additional flexibility with motor or wall mounting possible depending on installation space.   IE5+ Permanent Magnet Synchronous Motors NORD’s IE5+ synchronous motors help reduce system variants and operating costs thanks to their high-efficiency and constant torque over a wide speed range. The ventilated design effectively dissipates heat to support high overload capacity in intralogistics. The motors are manufactured in house for quick delivery times and fully match NORD’s modular system of gear units and variable frequency drives. When IE5+ motors are included in a drive system, there is a significant reduction in the Total Cost of Ownership (TCO) and a faster return on investment.   LogiDrive® Complete Drive Solution The LogiDrive® solution from NORD is a complete drive solution that reduces planning and commissioning efforts through a cost-effective, standardized design. LogiDrive is ideal for post and parcel, warehouse, and airport systems and for each area, there are advanced versions utilizing IE5+ synchronous motors and a basic version with IE3 asynchronous motors. The advanced versions provide a solution focused on issues such as energy efficiency, version reduction, and TCO while the basic version’s main concentration is reduction of operational costs.   NORDBLOC.1® Helical Bevel Gear Units NORDBLOC.1 two-stage helical bevel gear units are designed to optimize system performance, efficiency, and reduce variants. The single-piece, UNICASE housing ensures an accurate alignment of all bearings, internal shafts, and gears for long service life with easy maintenance. Flexible installation options including various input and output options, solid and hollow shafts, and versatile mounting make the drives highly adaptable to a wide range of applications. For hygienic environments, a closed housing with a smooth surface is available.   NORDBLOC.1® Helical Inline Gear Units NORDBLOC.1 helical inline gear units offer high versatility for intralogistics applications with 16 compact case sizes to choose from and single, double, or triple gear reductions. They deliver quiet operation and reliable performance in a smooth, easy to clean design. These units also do not have installation openings, increasing the stability of the product and preventing material accumulation. NORDBLOC.1 helical inline gear units additionally offer a variety of options including keyless shaft designs with shrink disc and GRIPMAXXTM, foot or flange mounting, reinforced bearings, and more.   Condition Monitoring for Predictive Maintenance In Condition Monitoring for Predictive Maintenance, drive and status data are recorded periodically or continuously to proactively maintain machines and optimize the efficiency of the entire plant. This status-based maintenance in place of time-based maintenance enables early detection of undesired operating conditions, allowing for planned downtimes for maintenance – saving operating, service, and material costs as well as extending the operating life of components. Data collected from Condition Monitoring can even determine the optimal time to change oil, ensuring systems are always operating at their highest capacity.   Visit NORD at MODEX Booth C8066 or visit www.nord.com to learn more about their highly efficient, cost effective gear units, motors, and control products for intralogistics applications.   About NORD DRIVESYSTEMS® With more than 4,000 employees, NORD DRIVESYSTEMS has been developing, producing and selling drive technology for more than 50 years, and is one of the global leaders of full-service providers in the industry. In addition to standard drives, NORD delivers application-specific concepts and solutions for special requirements such as energy-saving drives or explosion-protected systems. In financial year 2017, annual sales amounted to $781 million. NORD now has subsidiaries and sales partners in 98 countries worldwide. The dense sales and service network guarantees optimal availability, enabling short delivery times and customer-oriented service. NORD produces a very diverse range of drives for torques from 88 to more than 2.2 million lb-in, provides electric motors in the power range of 0.16 to 1,341 HP, and manufactures frequency inverters with the required power electronics of up to 215 HP. Inverter solutions are available for conventional control cabinet installations as well as for decentralized, fully-integrated drive units.   Contact Arielle Spotts 608-850-1444 Arielle.Spotts@nord.com

NORD DRIVESYSTEMS supports post and parcel distribution centers with modular products adaptable to individual application specifications. Their high-efficiency products increase the energy efficiency of conveyor systems, effectively lowering CO2 emissions and the Total Cost of Ownership (TCO).   NORD’s IE5+ product portfolio delivers a complete drive solution with one of the highest operational efficiencies on the market. The line is comprised of the DuoDrive Integrated Gear Motor, IE5+ Permanent Magnet Synchronous Motors, and NORDAC ON/ON+ Variable Frequency Drives. DuoDrive is an innovative solution that combines a single-stage helical gear unit with an IE5+ synchronous motor in one compact housing. Thanks to its optimized system efficiency, high power density, and quiet operation, it is especially suitable for intralogistics applications. The drive also features Plug-and-Play capabilities, allowing for fast commissioning and easy maintenance.   IE5+ Permanent Magnet Synchronous Motors are part of NORD’s new generation of high-efficiency motors. The motors are manufactured in house for quick delivery times and feature a non-ventilated version (TENV)for wash-down applications as well as a ventilated version (TEFC) for intralogistics. These motors have been designed for reducing variants and minimizing operating costs due to their consistent efficiency over a wide speed range, even at partial load and low speed ranges. With two case sizes to choose from, a power range from 0.5 – 5.0 hp, and continuous torque from 14 – 130 lb-in, these motors combine the benefits of NORD’s modular system with highly configurable solutions fitted to customer specifications.   NORDAC ON/ON+ Variable Frequency Drives were developed for the special requirements of horizontal conveyor technology with the NORDAC ON made for IE3 motors and the NORDAC ON+ built for combination with IE5+ motors. These VFDs are characterized by an integrated multi-protocol Ethernet interface configurable for each drive parameter, enabling dynamic control and synchronization of conveyor systems. The drives also offer a full Plug-and-Play solution for IIoT environments and thanks to their compact design, can easily be motor or wall mounted where space is limited.   NORDBLOC.1® Two-Stage Helical Bevel Gear Units provide optimized performance for post and parcel conveyor systems. Their high-efficiency, low maintenance, and high-power density ensure systems operate reliably as well as efficiently. High-strength aluminum alloy housings help maintain a low weight while an open housing design improves heat dissipation for applications with high axial and radial loads. Flexible installation options including various input and output options, solid and hollow shafts, and versatile mounting make the drives highly adaptable to a wide range of applications and environments.   NORDAC FLEX Variable Frequency Drives are NORD’s most flexible VFDs with fully scalable functionality and optional modules adaptable to specific application requirements. Their efficient operation and versatility results in a greater Return on Investment (ROI) and lower Total Cost of Ownership (TCO). Full PLC functionality and POSICON integrated positioning mode ensure conveyors move at the correct speeds with precise control. Multiple functional safety options are additionally available to protect users in distribution centers, parcels, and the systems themselves.   The LogiDrive® solution from NORD is a compete drive solution that reduces planning and commissioning efforts though a cost-effective, standardized design. Advanced and basic versions are available to choose from with advanced options including IE5+ synchronous motors, a decentralized frequency drive, and either a two-stage helical bevel gear unit or DuoDrive. Basic versions include an IE3 motor with a motor mounted VFD and flexible gear unit selection from the modular product line. While LogiDrive advanced solutions focus on energy efficiency, variant reduction, and lower TCO, the basic LogiDrive solutions focus on cost efficiency.   Condition Monitoring for Predicative Maintenance replaces time-based maintenance with a status-based maintenance approach to proactively maintain machines and avoid unplanned downtimes. With this system solution, drive and status data are recorded continuously or periodically to use for analysis and optimize operational safety and efficiency of systems. This status-based approach prolongs the service life of components and machines, increases system availability, and reduces service and material cost. Condition Monitoring can even determine the optimal time to change oil, ensuring drives are always operating at their highest capacity.   Visit www.nord.com for more information on drive solutions for Post & Parcel facilities.   About NORD DRIVESYSTEMS® With more than 4,000 employees, NORD DRIVESYSTEMS has been developing, producing and selling drive technology for more than 50 years, and is one of the global leaders of full-service providers in the industry. In addition to standard drives, NORD delivers application-specific concepts and solutions for special requirements such as energy-saving drives or explosion-protected systems. In financial year 2017, annual sales amounted to $781 million. NORD now has subsidiaries and sales partners in 98 countries worldwide. The dense sales and service network guarantees optimal availability, enabling short delivery times and customer-oriented service. NORD produces a very diverse range of drives for torques from 88 to more than 2.2 million lb-in, provides electric motors in the power range of 0.16 to 1,341 HP, and manufactures frequency inverters with the required power electronics of up to 215 HP. Inverter solutions are available for conventional control cabinet installations as well as for decentralized, fully-integrated drive units.   Contact James Chandler Key Markets Manager info.us@nord.com