Greer, SC—Creform Corporation, a manufacturer of unique products for the design and building of material handling structures and AGVs has developed an assembly workstation for a medical component manufacturer. The workstation is set up in a straight-line configuration to support one-piece-flow assembly practices.   Due to the flexibility of the Creform system of pipe and joints, the custom configurable workstation with dimensions of 36" W x 48" L x 75" H, allows the manufacturer to optimize its floor space. This flexibility makes it easy to add or remove associates as manufacturing needs change. The station could be run with one person or two if more production is needed. The structure has heavy duty leveling feet that adjust to the floor surface.   The unit features a plastic work surface as well as the pull-out sliding drawer just below the main work area, both made of HDPE plastic.  Above the work surface are two types of shelving for component storage.  The lower shelf is an angled shelf built to provide flow for multiple boxes, while the upper shelf includes a Creform flat pipe mounted towards to front to enable plastic bins to hang.   Also, the Creform flat pipe installed allows an eight-position power strip to be mounted to the unit.   The upper back section includes a steel pegboard for tool storage and provides for enhanced organization. At the top of the structure, a horizontal pipe is included to provide an LED work light. Also on the top, parallel Creform flat pipes are installed to allow a tool trolley to freely move left to right and allows a tool balancer to be connected. Mounted on the right side of the structure is a monitor to display work instructions or product specifications. A tool holder is located on the front left to hold scanners or assembly tools.   Under the main work surface, there is an angled shelf utilizing Creform slide pipe for bin storage.  Parts or supply replenishment can be performed on the back side of the structure preventing interruptions to the assembly operator working at the station.   Assembled structures are a great starting point for any user. After delivery and introduction, a user can take advantage of Creform’s flexibility by changing the station’s configuration and features to best match the needs of their production process and manufacturing associates.   The modular design allows a user to add only the accessories needed and  configure the station that works best. Further, workstations can be mobile or stationary, come in various pipe colors and for even heavier duty applications they can be built using Creform’s unique 42mm pipe.   Useful accessories for such a station include additional flow lanes, drawers, information sheet holders, label holders, tool storage, and hooks to hang tools and supplies. All Creform workstations can be configured for ESD components when sensitive electronics need to be protected.   Creform is the solution for dynamic material handling needs in the ever-evolving landscape of manufacturing. As pioneers in adaptive systems, Creform empowers companies to seamlessly integrate continuous improvement methodologies like Kaizen, 5S, and lean manufacturing principles.  From pipe and joint structures to gravity roller conveyors and cutting-edge AGV technology, Creform helps optimize efficiency across various applications. Whether it is streamlining workflow with flow racks and workstations or enhancing mobility with agile carts and AGVs, Creform solutions are tailored to elevate operational performance.    Contact BG Edwards, Creform Corporation bg.edwards@creform.com

Greer, SC—Creform Corporation, a manufacturer of unique products for the design and building of material handling structures and automated guided vehicles has developed an L-shaped work-cell workstation for an electronics components manufacturer to aid and assist its assembly operation.The L-shape line configuration supports one-piece-flow assembly practices. This flexibility makes it easy to add or remove associates as manufacturing needs change. The station could be run with one person or two if more production is needed.The workstation features a variation of Creform’s skate wheel conveyors.  Above the work surface are two levels of supply lanes that allow flow of small and medium sized bins.The upper shelf has a slight angle to return empty boxes. The lower section of the workstation also utilizes standard plastic wheel conveyors for larger totes to flow underneath the surface. The work surface is made of durable HDPE plastic.  At the top of the structure, a horizontal pipe is included to provide a location for hanging tools and could also accommodate a work light.Due to the flexibility of the Creform system of pipe and joints, each of the custom configurable workstation has a dimension of  39" W x 59" L x 86" H that allows the manufacturer to optimize its floor space and to efficiently use available workspace.The workstation lends itself to both complex assemblies with many parts or mixed model production for simpler assemblies. It boasts heavy-duty leveling feet that adjust to the flow of the floor surface. Parts or supplies replenishment can be performed on the back side of the structure preventing interruptions to the assembly operator working at the station. It is built with ESD White Gray colored plastic coated 28 mm steel pipe and clamped together nickel-plated metal joints.Useful accessories for such a station include overhead light, computer screen, shelves, additional flow lanes, drawers, information sheet holders, label holders, tool storage, and hooks to hang tools and supplies. All Creform workstations can be configured for ESD components when sensitive electronics need to be protected.The modular design allows a user to add only the accessories needed and  configure the station that works best today and then change it tomorrow as needs change by taking advantage of the Creform System’s flexibility.Further, workstations can be mobile or stationary. For even heavier duty applications they can be built using Creform’s unique 42mm pipe and are available with options such as drawers and shelves for storage, various pipe colors, casters instead of feet, tools and cup holders.Assembled structures are a great starting point for any customer. After delivery and introduction, a user can take advantage of Creform’s flexibility by changing the station’s configuration and features to best match the needs of their production process and manufacturing associates.The Creform System is used to create an array of material handling and efficiency enhancing devices and is a proven component in continuous improvement and lean manufacturing programs. The company partners with customers in developing custom solutions to enhance these programs.Contact:Creform Corporations800.839.8823SCsales@creform.com www.creform.com

The Storage Manufacturers Association (SMA) Industry Group of MHI is pleased to announce their newest video, “SMA: The Future of Storage,” a testimonial video.   The highlights: ·       SMA Members share brief testimonials on why their companies became SMA members ·       Members share the benefits of SMA for potential members, end-users, practitioners and the industry  ·       Members reference the importance of safety best practices and SMA’s commitment to developing standards for the industry   View the video here: https://videos.mhi.org/sma-the-future-of-storage    For more information about SMA, visit www.mhi.org/sma or contact Anna Harreveld at aharreveld@mhi.org,704-676-1190.   “The new testimonial video from SMA brings awareness to SMA’s collective thought leadership and industry expertise in the storage solutions space. If you are in the material handling and supply chain industry, the SMA is a strong resource for best practices and effective solutions,” said Sandy Ball, SMA Marketing Chair and Director of Marketing, Cornerstone Specialty Wood Products, LLC   “The new SMA video highlights the commitment that SMA has to the industry of providing effective storage solutions as well as collaboratively developing and promoting best safety practices,” stated Chris Pahls, SMA Chair and NexCaliber Product Manager, Steel King Industries. “We (SMA) hope that more companies will join us to make the industry better, safer and stronger together.”    Upcoming SMA Event- SAVE THE DATE!    SMA of MHI presents: The New SMA Standards and S-Mark Certification Program along with best practices that can mitigate risk at the 2023 ProMat Tradeshow Monday, March 20, 2023,  1:30 p.m.  Theater I- McCormick Place, Chicago   ·       The seminar highlights the new SMA standards on shelving, work platforms and stairways that have been proposed for inclusion in the 2024 International Building Codes (IBC) ·       An introduction to the SMA “S-Mark” certification program and how it will affect manufacturers, integrators and end users ·       Provides an overview of how adhering to best practices for boltless shelving and work platforms will help keep your facility safer by mitigating risks ·       You can gain access to this event with your free registration to attend ProMat    About SMA The Storage Manufacturers Association (SMA) members are the Industry’s leading suppliers of industrial storage equipment. They supply storage solutions worldwide and in virtually every major manufacturing and distribution sector. Industrial storage equipment includes steel shelving, industrial work platforms, work and assembly stations, modular drawer equipment, clothing storage lockers, movable base storage equipment, storage containers and directly related equipment.   About MHI MHI is an international trade association that has represented the material handling, logistics and supply chain industry since 1945. MHI members include material handling and logistics equipment and systems manufacturers, integrators, consultants, publishers and third-party logistics providers. MHI offers education, networking and solution sourcing for their members, their customers and the industry as a whole through programming and events. The association sponsors the ProMat and MODEX expos to showcase the products and services of its member companies and to educate manufacturing and supply chain professionals.  

The Storage Manufacturers Association (SMA) members are the Industry’s leading suppliers of industrial storage equipment. They supply storage solutions worldwide and in virtually every major manufacturing and distribution sector. Industrial storage equipment includes steel shelving, industrial work platforms (mezzanines), work and assembly stations, modular drawer equipment, clothing storage lockers, movable base storage equipment, storage containers and directly related equipment.